- Drop in fit for Gen 1-4
- Machined from 416 stainless steel and heat treated to RC 41
- Fully supported chamber and improved feed ramp design
- Polished Feed Ramp for easy feeding
- Target crown and oversized lock up area
- Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
- 1:10 twist rate
- 1/2x28 threaded muzzle
- Barrel length 4.462"
*Thread Protector Not Included---> Click Here To Purchase
These G19 threaded barrels are only $44.99 with free shipping. Do not assume the low price indicates low quality. The quality of these barrels is excellent.
As a retired Manufacturing Engineer, Journeyman Tool Room Machinist and Glock Armorer I can state that the nitride finish, muzzle crown, chamber throat, suppressor threads and overall machine work are equal to much more costly barrels.
I now have over ten of these on hand and the quality has been consistent on every order. I highly recommend them. They have required no fitting when used with inexpensive Dagger slides.
Be aware however that the less expensive $39.99 un-threaded G19 barrels are not up to the same level of quality. The standard barrels are OK...but the threaded barrels are better. Well worth the added cost. For example…The 9x19 caliber barrel markings on the plain barrels are done poorly and are much too shallow. By comparison the threaded barrels have quality, clear, uniform embossing.
These are GTG as a very cost-effective EDC barrel...
Be aware however that the photo of the threaded barrels posted online do not do the barrels justice. The photos show a poor overall finish. The barrels received are flawless...
As a retired Mfg. Engineer and Glock Armorer I was very impressed with the quality of manufacture and machine work of these barrels. The fit is excellent. The only two issues are that the 9X19 marking on the breach of these barrels is much too faint and appears to have been done after the nitride finish was applied. Also the nitride finish is not as bright as expected. By contrast, the G19 threaded barrels have deep clear embossing of the 9x19 markings and the nitride finish is a more polished and brighter finish. For the extra slight cost the threaded barrel is IMO the better choice.
Awesome product at a great price! Couldn't be happier with the price and service!
Fast shipping. Great price. Drop-in fit. Accurate and shot to same poa/poi as factory barrel. I bought to replace ported barrel in my 19c. Also bought thread protector. Will not be my only purchase from Combat Armory!
Fits my Gen 5 well with no issues. I’ve only been able to put a few hundred rounds through it but this barrel has performed well. The finish has held well and the quality is outstanding.
Y’all. It’s good. Bought it for a p80. May be replacing all my barrels with these. Everything is slightly larger than a normal drop in or so it seems. It locks up tight. It fits better than my Killer innovations barrel or my stock barrels. (That’s good) less wiggle means a more machine fit, more accuracy. I can’t believe I got one for under 70.
I was a little hesitant because of the overall appearance of the site and the price. However don't judge this book by it's cover.
These barrels all dropped right in and I have had no issues whatsoever. As of 9-17-21 I have fired approx. 400 to 700 RDs through Each of these barrels and I have had Zero Issue. I do not regret this purchase and in fact intend to purchase more.
Fit and finish is awesome
As good as it gets. Period